Solderless Connector
(Single Color)

Our solderless connectors are very easy to use with our Flexible LED Strip. There is no need to solder connections together. Just slide the strip into the connector and use wire nuts or butt connectors to connect to the power supply. There are two types to choose from. If you are installing under cabinet lights then we suggest the connector with 5" wire. The wire is thin so you can drill a 1/8" hole and fish the wire through to connect to the next section of strip (or power supply).

Connector with 5" Wire

Two Connectors with 5" Wire In Between

Solderless Connector
(RGB Color Changing)

This solderless connector is a real time saver when you use it with our Color Changing RGB Flexible LED Strip. Just match the wires to the colors on the strip then lock in the flexible LED strip. You can use wire nuts to connect to the controller and power supply.

RGB Connector with four 5" Wires

Solderless Strip to Strip
Connector
(Single Color)

You can connect two strips of single color flexible LED Strip with this connector. Simply line up the positive and negative connection points and slide both strips into the connector. Lock the strips into the connector and your ready to light up the strip.

Solderless Strip to Strip
Connector
(RGB Color Changing)

This connector eliminates the need for soldering. It makes connecting two strips of RGB LED Flexible LED Strip easy and fast. All you have to do is line up the R-G-B & positive connection points and slide both strips into the connector.

DC Coaxial Jack
2.5 mm pin x 5.5 mm (ID)

Make quick and easy connections with this DC Coaxial Jack. Just solder red positive wire to the inside cylinder and the negative black wire to the outside tab. Plug to power supply and your ready to enjoy your LED strip lights. Shown here is the inside and the cover of the jack.